Filter
Top Products
13BASIC OPERATION
Talk Back
You can use the talk back feature to talk to your baby.
Whilst using Talk Back you will not be able to hear your
baby until you release the [Talk] key.
• Press and hold [TALK] key on the Parent unit to speak
to baby.
• "Talk" is shown on the display and the green link lights
on both Units fl ash.
• Talk into parent unit microphone.
• Release [TALK] key to hear your baby again.
Note:
Do not press [TALK] key when the baby unit and the parent unit
are in the same room as a high-pitch noise will be generated.
If the Parent Unit volume is off, the Parent Unit volume will
reset to the default volume setting.
Paging
If the Parent Unit is misplaced, you can use the page
button on the Baby Unit to locate the Parent Unit.
• Press [Page] key on the Baby Unit. The paging alert will
sound.
• "PAGING" is shown on the LCD display of both units.
• To stop the Page alert, press any button on the Parent
Unit, or press [Page] key again on the Baby Unit.
Note:
If no button is pressed, the paging tone will stop after 2 minutes.
If the Parent Unit volume is off, after paging operation, the
Parent Unit volume will reset to the default volume setting.
Torch
Press [TORCH] key on the parent unit to switch the torch
on and off.
Night Light
The Night Light on the baby unit can be turned on or off
from either the baby unit or the parent unit. You can set
a comforting Night Light with a choice of three brightness
levels.
Baby Unit
• Press [ ] key to turn Night Light on or off.
• Press [ ] key repeatedly to select the brightness
settings.
Parent Unit
If the Night Light on the baby unit is off,
• Press [Menu] key and use [ ] or [ ] key to scroll to
"Night Light".