Filter
Top Products
16 BASIC OPERATION
Delete a recorded lullaby
1. Press and hold [Rec]. After 2 seconds the display
shows "Deleted".
2. Release [Rec].
• To avoid deleting a recorded message, press [
] on
the Baby unit to check whether the Own prompt is
displayed. If Own is displayed in the lullaby list, there is
a recorded message.
Connect to an auxiliary player
Plug another player into your Baby unit, to play songs or
stories.
On the Parent Unit:
1 Press [Menu] and use [ ] or [ ] to select "Lullaby".
2 Press [ ], "Play Lullaby?" is shown on the display.
3 Use [ ] or [ ] to select "Select New" and press [ ].
4 use [ ] or [ ] to select "Aux" and press [ ].
You can now use the external player.
On the Baby unit:
1 Plug your player to the auxiliary input socket on the
back of the Baby unit.
2 Press the [ ] key repeatedly until you reach the AUX
menu.
3 You can now use the external player.
Out of Range
When the baby and parent units have no link with each
other (eg. Out of range, parent unit or baby unit is not
powered on), the green Link LED fl ashes. If there is no link
for more than 30 seconds, "Not Linked" will be displayed
on both units. The link break alert will also be emitted from
the speaker of the Parent Unit every 30 seconds. The red
Link LED will flash. When the units are linked, the green
Link LED will be steadily lit.
Note:
Link break alert cannot be manually set on or off, but it can
be suppressed for 4 minutes by pressing any button.
There is only visual alert shown on the Baby Unit.
Low Battery
Baby Unit
When the unit is running on battery power and reaches low
battery level, the display will show Low Battery. Once the
low battery level is reached, the baby unit should still be
able to operate for approximately 30 minutes.