Filter
Top Products
25
TrOuBLESHOOTiNGuSiNG yOur DiGiTAL BABy mONiTOr
Should you experience difficulties operating the SC310 please refer to the
troubleshooting guide below. If you still experience difculties please contact Oricom
Customer Support on 1300 889 785 for assistance.
Troubleshooting
Problems Solutions
Link light does not
come on
− Check that both the Baby and Parent units are
switched on.
− Check that the batteries in the Parent unit are correctly
installed and that they are charged.
− Check that the mains power is plugged in and
switched on at the Baby unit.
− Check that the units are within range of each other.
Link light is flashing
green
− If you have pressed
to use the Talk Back
feature, the Link light will flash to indicate one-way
communication between the units.
− The units are searching for a communication link.
− Check units are within range of one another.
− Check both units are turned on.
Link indicator is
flashing red
− The link between your units is broken. You will also
hear an alert on the Parent unit to let you know
there is no communication between the units. If this
happens, check that the mains power (or batteries) is
correctly connected and that the units are within range
of one another. See page 15 for instructions on linking
the units.