Filter
Top Products
15
Switch on and link the Parent and Baby units
1. Press and hold the button on the Baby unit for 1 second. The nightlight will
briefly illuminate and then the green Link indicator will flash.
2.
Press and hold the button on the Parent unit until all the LEDs on the unit briefly
illuminate. The green Link indicator will flash.
Removing the batteries
If you ever need to remove the batteries, simply slide open the battery compartment cover and use the
ribbon to eject the batteries.
Once the units are Linked the green Link light on the top of the Parent unit and
the green LED on the Baby unit will stop flashing and remain a steady green.
The units are now ready to use.
The link conrmation between the two units is vital for use so they can communicate. If
the link between the units is broken at any time, the Link indicators on the Parent and
Baby units will flash green as they try to search for each other. After 30 seconds, if the
link is still broken they will flash red and you will also hear an alert signal from the Parent
unit.
IMPORTANT
Never use non-rechargeable batteries in the Parent unit. Only use the recommended
type – 2 x AA NiMH 1300mAh batteries. Using other types could permanently
damage the unit. Charge the batteries as instructed in this user guide. The Parent
unit can still be used when it is in the charger.
Warning
SETTiNG upSETTiNG up
!
!