Filter
Top Products
6
GS748T Gigabit Smart Switch
Overview
The NETGEAR GS748T Gigabit Smart Switch provides 48 twisted-pair ports with four built-in
Small Form Factor (SFP) GBIC slots that support nonstop 1000M fiber networks.
Using these Gigabit slots, you can create high-speed connections to a server or network
backbone. For example, you can:
• Connect switches to each other with high-speed links
• Link to high-speed servers
• Provide 10/100/1000M copper and 1000M fiber connectivity
The NETGEAR GS748T Gigabit Smart Switch also provides the benefit of administrative
management with a complete package of features for the observation, configuration, and
control of the network. With a Web-based Graphical User Interface (GUI), the switch’s many
capabilities can be viewed and used in a simple and intuitive manner. The switch’s
management features include configuration for port and switch information, VLAN for traffic
control, port trunking for increased bandwidth, Class of Service (CoS) for traffic prioritization,
IPv6 Management support to enable IPv6 operation over the network port, IPv6 QoS, IPv6
ACL, static routing, and EEE support. These features provide better understanding and
control of the network. Initial discovery of the switch on the network requires the Smart
Control Center program, a utility that runs on a computer.
The NETGEAR GS748T Gigabit Smart Switch can be free standing or rack mounted in a
wiring closet or equipment room. It is IEEE-compliant and offers low latency for high-speed
networking. All ports can automatically negotiate to the highest speed. This capability makes
the switch ideal for environments that have a mix of Ethernet, Fast Ethernet, or Gigabit
Ethernet devices. In addition, all RJ-45 ports operate in half-duplex or full-duplex mode. The
maximum segment length is 328 feet (100 meters) over Category 5 Unshielded Twisted-Pair
(UTP) cable.