National Instruments SCC-TC Series Thermocouple Input Modules Model Vehicle User Manual


 
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the Terms of Use section on ni.com/legal for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products, refer to the
appropriate location: Help»Patents in your software, the patents.txt file on your CD, or
ni.com/patents.
© 2002–2006 National Instruments Corporation. All rights reserved.
371074C-01 Jul06
Table 1 lists the signal connection corresponding to each pin. AI (X) and
AI (X+8) are the analog input signal channels of the E/M Series DAQ
device. AI GND is the analog input ground signal and is the reference for
AI (X) and AI (X+8). A GND is the reference for the ±15 V supplies and
REF 5V. AI GND and A GND connect to the SC-2345/2350 at the
SCC-PWR connector.
Table 1. SCC Module Pin Signal Connections for SCC-TC0X Modules
Pin Number Signal
1 AI (X)
2
3
4 AI (X+8)
5
6 DAQ Device AI GND
7
8
9
10
11 A GND
12 REF 5 V
13 +15 V
14 –15 V
15
16
17
18
19
20