National Instruments SCC-TC Series Thermocouple Input Modules Model Vehicle User Manual


 
SCC-TC Series Thermocouple Input Modules User Guide 10 ni.com
Specifications
These specifications are typical at 25 °C unless otherwise stated.
Analog Input
Number of input channels.......................1 DIFF
Input signals............................................Thermocouples of types B, E, J,
K, N, R, S, and T
Input signal range ...................................±100 mV
Input impedance .....................................10 MΩ powered on,
10 kΩ powered off or overload
Bandwidth...............................................2 Hz
Amplifier Characteristics
Open thermocouple detection current.....250 nA max
1
(assuming floating thermocouple)
Common-mode rejection ratio................110 dB min
1
Output range ...........................................±10 V max
1
Transfer Characteristics
Gain ........................................................100
Gain error................................................±0.08% max
1
Gain stability...........................................±0.0005%/°C max
2
Offset error .............................................±5 μV max (post calibration)
1
Offset stability ........................................±0.6 μV/°C max
2
Nonlinearity ............................................±0.004% max
1
Recommended warm-up time.................5 min
1
Temperature range is 23 °C ±5 °C.
2
Temperature range is 0 to 50 °C.