Filter
Top Products
8
Midland MODEL 1001Z CB Operating controls
FRONT PANEL CONTROLS
ON/OFF VOLUME: In the off position your transceiver power is off. Turn
this control clockwise to switch on the unit and adjust the volume.
SQUELCH CONTROL: Adjust this control until background noise just
disappears. If the control is adjusted too far clockwise it may cause
muting of weaker signals.
S/RF POWER METER: This display is used in receiving to indicate the
relative signal strength of incoming signals. When transmitting, it shows RF
power output.
PA/CB Switch: When in PA mode, it causes your voice to operate the
optional external PA speaker. In CB mode, the microphone operates the
transmitter.
MICROPHONE CONNECTOR: Plug in the supplied microphone to this
connector. Received signals will not be heard without the microphone.
CHANNEL KNOB: This easy-to-operate control allows changing of CB
channels, either up or down.
CHANNEL INDICATOR: The LED displays the channel number.
TX LED: indicator for showing the unit is transmitting.