Filter
Top Products
3
Welcome to the world
of Midland electronics
Congratulations on your purchase of a state-of-the-art mobile CB radio. In
the years ahead, you can expect to realize time and again why Midland holds
the front running position among CB users everywhere. You will come to
know that Midland power is more than just a slogan, but the heading of long
list of hearable, seeable benefits. As your Midland CB experience unfolds
and grows we hope you will remember that CB is only one kind of electronic
excellence available under the Midland name.
Your 40 channel CB represents the state of the art in high tech engineering.
The unit incorporates microprocessor controlled PLL circuitry for precise
tuning.
How to install your Midland mobile CB
This transceiver may be installed in any 12-volt negative ground-
system car or truck. Most current U.S. and foreign vehicles use a negative
system, but some older models and some newer large trucks may have a
positive ground.
Check the requirements for your vehicle before you begin
installation.
Generally, you have a negative-ground system if the minus ( - )
battery terminal is connected to the motor block. Contact your dealer in the
event you are unable to determine your vehicle’s polarity system.
Installation and operating accessories furnished with your
Midland CB:
1. Easy removal mounting bracket system.
2. Microphone bracket system.
3. All main-unit and microphone mounting hardware needed for normal
installation.
4. Plug-in microphone with coil cord.
5. FCC part 95, Subpart D.
6. Owner’s Manual.
Where to locate your CB transceiver.
Your new Midland CB is designed to be installed under the dash or
vertically on a console of your vehicle.