Filter
Top Products
21 -
Operating modes – TV
Calling additional functions
Select additional functions such as Image+
✳
, Teletext subtitles,
Personal teletext pages, Headphone volume, Scan stations and
to move the picture up and down.
Call timer overview
If timer recordings have been programmed, you will see when
which station is recorded here.
Select picture format
The TV set sets the best picture format automatically when Auto
format is switched on. If you want to set a different format,
press this button until the desired format is selected or select the
format with .
In sets with an LCD screen, you can switch the panorama picture over to distorti-
on-free representation. Dark margins are then visible on the left and right of the
picture.
Switching over: Keep the M button on the set pressed, at the same time press the
”Picture format”
button on the remote control briefly.
Resetting: Press the same button combination again.
Move picture up/down
To make picture subtitles visible, you can use to move
the picture up or down with the picture formats “Panorama“,
“Cinema“ and “Zoom“.
Note: for DVB-T stations in UK you can switch back and forth quickly between two
stations using this button
TV menu
Call up the TV menu
You will find a description of the picture and sound settings on page 19. The TV
menu offers other options for recording, connections and settings of the TV set.
For a recorder that is logged in, you can find the following menus in the
“Recording“:
Recording wizard - to programme new timer recordings
• Via EPG • Via teletext (VPT) • Manually
You will find further information about timer recording on page 33.
Timer list
Here you will find a list of programmes programmed for recording. You can
change the recording data or delete programmed recordings and programme new
recordings.
Pre-record time and Post record time
For recordings without VPS/PDC, set a lead and lag time here so that the pro-
gramme is fully recorded despite any slight differences in the time.
Under “Connections“ you will find the following functions:
New devices/modifications (connection wizard)
The connection wizard helps you connect and log in additional equipment such
as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV
decoders, equipment with component signals and digital HDMI/DVI signals.
Antenna DVB
• Antenna DVB-T • Antenna DVB-S
✳
You can find more information on pages 13 and 14.
Digital Link Plus
Transmission of the station data from the TV set to the video/DVD recorder if a
recorder with Digital Link Plus is connected.
Miscellaneous (connections)
• Set AV norm for the connections manually (if it is not recognised automatical-
ly).
• “Assign audio digital signals“ to one of the AV sockets.
• “Allow switching voltage“ to display the signals of the connected device imme-
diately on the screen via Euro AV during playback.
• RGB insertions at AV2 to play back RGB signals at all station storage locations.
• Select decoder stations and set sound encoding.
Under “Settings“ you will find the following functions:
Stations
Here you can search for and store new stations automatically or manually. With
“Change stations“, you can rearrange and delete the stations and change station
names (not for DVB-T stations in UK).
• Search wizard • Manual adjustment • Change stations
Zoom
Cinema
Panorama16:9
Picture format
4:3
END
Timer list Fri 12.09./14:12
12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d
Detail New recording Change
Delete
TEXT
INFO
Picture adjustment ...
INFO
END
Settings
Connections
Recording
Sound
TV menu
Picture
Teletext subtitles Personal teletext pages Headphone volum
e
Additional functions
OK
INFO
END
BA32789_021XelosModusRel_5_GB.in21 21BA32789_021XelosModusRel_5_GB.in21 21 15.01.2007 16:55:2815.01.2007 16:55:28
Downloaded From TV-Manual.com Manuals