Filter
Top Products
6
Check fasteners
After one hour of use, check all fasteners to
make sure they are secure. Adjust if necessary.
Periodically check the stroller to ensure that it
is in good operating condition.
To adjust the stroller from pulling to the left
or right (not rolling straight):
Loosen the front Q/R axle and point the front
wheel in the opposite direction the stroller is
pulling, then tighten Q/R lever,
NOTE: Sometimes it is a very slight adjustment
to eliminate the pulling and this step may need
to be repeated.
To adjust front brake caliper:
If front caliper requires additional adjustment to
engage brake pads; first open Q/R brake lever,
loosen the cable adjustment nut, squeeze the
brake pads together and while holding brake
1-800 -242-6110
8am-5pm CST, Monday-Friday, or MAIL to:
2425 Enterprise Drive, Suite #900
Mendota Heights, MN 55120 USA
Tel: 1-800-242-6110
or visit us at www.instep.net
E-mail: info@instep.net
WARNING:
If you have any questions concerning the safe use of this product,
please contact InSTEP LLC before using:
pads retighten cable adjustment nut. Then close
Q/R lever and check adjustment by squeezing
hand brake lever. For micro adjustment, turn the
front brake caliper’s adjusting sleeve counter-
clockwise. Once the brake pads are adjusted
to the desired distance from the rim, tighten the
lock ring. You will need to adjust the cable
periodically since it is normal for the cable to
stretch from use (See Figure C).
To clean seat and canopy:
If light cleaning is required, use a soft cloth with
warm water and mild soap then air dry. Do not
put in washing machine. Do not put in dryer.
DO NOT BLEACH.
To clean frame:
Wipe using a soft cloth with warm water and
mild soap. Air dry. DO NOT USE polish or
abrasives.
CARE AND MAINTENANCE