Filter
Top Products
44
Firmware Upgrade
Used for upgrading the LiteShow firmware, and for importing and exporting configuration settings
(this is helpful when multiple LiteShow devices are being configured).
To update your LiteShow firmware:
1) Connect the LiteShow device to your network RJ45 connector before updating. (Do not update
wirelessly.)
2) Download the latest firmware image file (*.awd) from the InFocus support site
(www.infocus.com/support
) to your computer.
3) Choose
Firmware Upgrade
from the left-hand menu.
4) Click
Browse
and open the firmware image file you previously downloaded to your computer.
5) Click
Upgrade
.
Note:
This process will take several minutes.
6) After a message appears stating the update has been successful, click
OK
and begin using
LiteShow.