Filter
Top Products
40
AP Setup
The AP Setup feature allows LiteShow to connect to the corporate network as a wireless client rather
than through the RJ45 wired connection.
Connect to Existing AP:
To setup LiteShow as a wireless client, choose “Enable.” Note: Enabling
the Wireless Client will disable both the wired RJ45 connection and Gatekeeper (Gatekeeper will
be set to “All Pass”). Disabling the Wireless Client will restore the RJ45 wired connection.
Existing AP SSID:
the SSID string of the corporate wireless LAN (maximum length 32 bytes; no
spaces).
Encryption:
the encryption method required to access the corporate wireless LAN
(WEP/WPA/WPA2 64-bit or 128-bit in ASCII or HEX string).
Key:
the value required to access the corporate wireless LAN. Used only when Encryption is
enabled.
Gatekeeper
Designed to ensure enterprise network security.
All Pass:
allows Guest Users connected through a wireless connection to access the office
network (LAN).
All Block:
prevents Guest Users connected through a wireless connection from accessing the
office network (LAN).
Internet Only:
prevents Guest Users from accessing the office network (LAN), but still allows
internet traffic (browser packets i.e. port 80, 443) to pass through.
SNMP
Allows you to enable or disable SNMP services.