Filter
Top Products
44129-01 • 07/23/2012
32
Additional Features
There is no need to stand at the wall where the thermostat is mounted
while programming or changing settings. Simply remove the thermostat
from the wall and make the necessary changes in the comfort of a
chair. You can also set your programming and settings before you even
install the thermostat.
Armchair Programming
Your thermostat has a blue LED lamp that backlights the display for
easy viewing in the dark. When any key is pressed, the backlight will
be activated. The display will stay illuminated for 15 seconds after the
last key is pressed.
Blue Backlight
To protect your system from cycling, system turning on and off rapidly,
your thermostat will prevent your system from turning back on for up to
3.5 minutes after it has been shut down.
System Protection
In situations where your thermostat may not seem to be operating
properly or if you just want to reset and start over, press and hold the
and buttons for 3 seconds until the screen ashes “Updated!”. This
will restore the thermostat to factory condition.
Reset