Hunter Fan 44279 Doll User Manual


 
44129-01 • 07/23/2012
12
• The schedule time can be set in 15 minute increments, and remains the same
for both Heat and Cool programs.
• The scheduled temperature can be set in increments of 1°F (1°C).
• After 15 minutes without a key press, the thermostat will return to the home
display screen and save any changes you have made.
• When setting the schedule time, note the AM / PM indicator.
• At any stage during your scheduling, you can use the
Back
or
Next
buttons
to move forward or backwards through the steps.
Done/
Home
will also save any
changes, even if you have not scheduled or altered all settings.
• Arrows beside each schedule mode and beside heat/cool modes will indicate
which is active.
Read the scheduling section thoroughly to ensure you understand your
scheduling options and which will best t with your lifestyle. The following notes
should help you with scheduling:
Scheduling Introduction
This thermostat has been pre-programmed to provide optimal energy savings.
No programming is necessary. We recommend you run these programs for
a few days before adjusting your programming. If it is necessary to change
these settings, use the scheduling table on the next page to record your new
settings. You will also nd the default schedule there as well.