Filter
Top Products
44129-01 • 07/23/2012
10
Setting Day and Time
Once you install the batteries, the thermostat will prompt you to set the
current day and time.
1. You will notice that “Mon” will be ashing at the top left of your
screen. Use the or buttons to move to your current day of the
week and press the
Next
button to advance to the next step.
2. Use the or button to change between am(A) and pm(P). Choose
Next
to advance.
3. Next you will select your current hour by using the or buttons.
The
Next
button advances you to the next step.
4. Set your minutes using the or and press
Done/
Home
to nish or
Back
if
you need to make a correction to a previous step.
5. When nished, the thermostat will show “Updated!” to conrm your
settings are saved.
6. Your thermostat will next prompt you to set your programming, see
page 14 step 2 if you wish to alter your programs at this time.