Filter
Top Products
Page 5SKU 97456 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Product
Application
Universal t. Works with most European,
Asian, and United States made vehicles.
Operating Air
Pressure
72 PSI to 110 PSI
Air Inlet Size 1/4” - 18 NPT
Fabrication
Forged steel Disc Adapters.
Die Cast Aluminum Gun with stamped
steel and machined steel.
Additional
Features
Rotates left or right to wind back pistons.
Magnetic pad base.
Trigger pressure speed control.
15 Pads.
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Disconnect the Caliper Wind
Brake Tool from its
compressed air supply
source, and release any
compressed air from the tool
before performing any set up
and operating procedures.
Product Features
Product Applications
The following indicates which specic 1.
Pad must be used for each vehicle
make and model.
(See Figure B, next page.)
Pad 2: Citroen/XM
®
,
Xantia
®
(F/R)
Pad 3: Audi
®
(F), FIAT/Alpha Romeo
®
,
Ford Fiesta
®
(F), ISUZU
®
(F),
HONDA
®
Concesto (F),
Jaguar
®
XJ6, XJ40 (F/R),
BMW
®
318is, 320i, 325TD,
WARNING
PAD
TRIGGER (6A)
DIRECTION
HANDLE
18A)
AIR CONNECTOR (5A)
FIGURE A
SLIDING BAR
(2A)