Filter
Top Products
9
Toddler Seat Base
One-Time Assembly
• Position the toddler seat side rails, with the release buttons outward.
• Position the toddler seat front crossbar with the curve outward.
• Fit posts on the crossbar into the sockets in side rails.
Hint: The crossbar is designed to fit one way. If it does not seem to fit
in the side rails, turn it around and try again.
• Insert four screws into the crossbar and tighten.
• Fit posts on the toddler seat rear crossbar into the sockets in
side rails.
Hint: The crossbar is designed to fit one way. If it does not seem to
fit onto the side rails, turn it around and try again.
• Insert four screws into the crossbar. Fully tighten the screws.
• Turn the toddler seat base upright.
1
2
3
4
Toddler Seat
Front Crossbar
Curve
Toddler Seat
Side Rails
Release Button
Release Button
Toddler Seat
Rear Crossbar
2 Screws
4 Screws
2 Screws