Filter
Top Products
7
Infant Seat Base
One-Time Assembly
• Fit the infant seat rear crossbar into the sockets in on the side rails,
as shown.
Hint: The crossbar is designed to fit the side rails one way. If it does
not seem to fit, turn it around and try again.
3
• Insert two screws into the holes in the crossbar and tighten.
• Turn the infant seat base assembly upright.
4
• Locate the infant seat side rails and the infant seat front crossbar.
• Position the infant seat side rails, as shown, with the release
buttons outward.
• Fit the crossbar into the sockets in the side rails, as shown.
Hint: The crossbar is designed to fit the side rails one way.
If it does not seem to fit, turn it around and try again.
• Insert two screws into the holes in the crossbar and tighten.
2
1
Infant Seat
Side Rails
Release Button
Release Button
Infant Seat
Front Crossbar
Infant Seat
Rear Crossbar
2 Screws
2 Screws