Filter
Top Products
15
Infant Swing Use
• Slide the swing speed/power switch ON
•
.
• Give the seat a light push to start the swinging motion.
• Adjust the swing speed/power switch to the desired swing
motion setting.
Hints:
- After turning on power, this product may not swing unless there is
a child in the seat.
- As with most battery-power swings, a heavier child will reduce
the amount of swinging motion on all settings. In most cases, the
low setting works best for a smaller child while the higher setting
works best for a heavier child.
- If swinging stops while using a lower setting, try a higher setting.
Give the seat a light push to start the swinging motion again.
• Slide the swing speed/power switch OFF when you are finished.
4
Speed/Power
Switch
Hint: If you are converting to an infant swing from high chair or
toddler seat modes, remove the seat from the toddler seat base.
• Fit the seat onto the swing seat base.
• Push to “snap” the seat in place. Pull up on the seat to be sure
it is secure.
3
Seat
Swing Seat Base