Filter
Top Products
8
Starting the Swing
IMPORTANT! Before each use, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. DO NOT use
if any parts are missing or broken. Contact Mattel for replacement
parts and instructions if needed. Never substitute parts.
• Slide the power switch to any of five speed settings.
• Give the seat a light push to start the swinging motion. Adjust
the power switch to the desired swing motion setting.
Hint: As with most battery-powered swings, a heavier child will
reduce the amount of swinging motion on all settings. In most
cases, the low setting works best for a smaller child while the high
setting works best for a larger child.
• If swinging stops while using a lower setting, try a higher setting.
Give the seat a light push to start the swinging motion again.
• Be sure to turn this product off when not in use. Slide the power
switch to the off setting
O.
Storage
• Lift the seat bottom.
• Press the frame release buttons on the inside of the frames and
push the front legs inward.
Power Switch