Filter
Top Products
4
• While standing on the base tube, pull the front legs up. The front
legs should remain secured to the base tube. If you can remove
the front legs, you have not assembled them correctly to the base
tube. Re-read and repeat assembly step 2.
Base Tube
PULL UP
3
Base Tube
• While pressing the buttons on the end of each back leg, insert the
back legs into the ends of the remaining base tube.
• Push the back legs down into the base tube until the buttons
"click" into place.
Press Buttons
on Back Legs
4
Assembly
• While standing on the base tube, pull the back legs up. The back
legs should remain secured to the base tube. If you can remove
the back legs, you have not assembled them correctly to the base
tube. Re-read and repeat assembly step 4.
Base Tube
PULL UP
5
Seat Frame
Seat Hubs
• Position the seat frame so that the tubes are upright, as shown.
Hint: Note the location of the socket inside each seat hub.
The ends of the frame arms will be inserted into these sockets.
• Fit the end of each frame arm into the socket in each seat hub.
Frame Arm
6
Socket