Filter
Top Products
3
IMPORTANT! Please remove all parts from the package and identify
them before assembly. Some parts may be packed in the pad.
#6 x 3 cm Screw – 2
Note: Tighten or loosen all screws with a Phillips screwdriver.
Do not over-tighten the screws.
Shown Actual Size
2 Base Tubes
Parts
CAUTION
This package contains small parts in
its unassembled state. Adult assembly
is required.
2 Swing Frames
Seat Pad
Seat Frame
Assembly
IMPORTANT! Before assembly, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. DO NOT use
if any parts are missing or broken. Contact Mattel for replacement
parts and instructions if needed. Never substitute parts.
• Slide the front and back legs on the swing frame outward until
they "click" into place.
• Repeat this procedure to open the other swing frame.
Front Leg
Back Leg
1
Press Buttons on Front Legs
Base Tube
• While pressing the buttons on the end of each front leg, insert the
front legs into the ends of one of the base tubes.
• Push the front legs down into the base tube until the buttons
"click" into place.
2