Filter
Top Products
8
• Place your child in the seat and secure properly.
Hint: After turning on power, this product may not swing
unless there is a child in the seat.
• Slide the power switch to any of five speed settings.
• Give the seat a light push to start the swinging motion.
Adjust the power switch to the desired swing motion setting.
Hint: As with most battery-powered swings, a heavier child
will reduce the amount of swinging motion on all settings.
In most cases, the low setting works best for a smaller child
while the high setting works best for a larger child.
• If swinging stops while using a lower setting, try a higher
setting. Give the seat a light push to start the swinging
motion again.
• Slide the music switch to on with low volume ; on with
high volume or off
.
• Be sure to turn this product off when not in use. Slide
the power switch to the off setting
.
• Make sure your child is properly secured in the swing seat.
• Grasp both handles, as shown, and lift.
• Carefully carry the swing to another room. Be sure to set
the swing down on a non-elevated, flat surface.
Swinging and Music
Music Switch
Power Switch
Storage
• Lift the seat bottom.
• Press the frame release buttons on the inside of the frames
and push the front legs inward.