Filter
Top Products
5
Assembly
• Insert a screw through the outside of each seat hub.
Tighten the screws.
Seat Hub
Seat Hub
7
• Fit the pad upper pocket over the seat back tube.
• From behind the assembly, insert the waist belts through
the slots in the pad.
Seat Back Tube
Pad Upper
Pocket
Waist Belts
Waist Belt
Slots
8
Pad Lower Pocket
Seat Bottom Tube
9
• Fit the pad lower pocket onto the seat bottom tube,
as shown.
• Lift the seat bottom tube and buckle the straps on the
pad together. Make sure you hear a "click".
• Insert and “snap” the peg on the toybar into the socket
on the swing arm. Pull the toy bar up to be sure it is secure.
• Fit the toy strings up through the slots in the toy bar leaf.
Assembly is now complete.
Toy Bar
Socket
10