Filter
Top Products
3
2 Base Tubes
Toy Bar
2 Toys
Parts
2 Swing Frames
Seat Pad
#6 x 3 cm Screw – 2
Shown Actual Size
IMPORTANT! Please remove all parts from the package
and identify them before assembly. Some parts may be
packed in the pad.
Note: Tighten or loosen all screws with a Phillips
screwdriver. Do not over-tighten the screws.
Seat Frame
Hint: To allow the product
to swing properly, the swing
arm-to-frame (with power
switch) connection is
designed to be loose.
Assembly
IMPORTANT! Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or
sharp edges. DO NOT use if any parts are missing or bro-
ken. Contact Mattel for replacement parts and instructions if
needed. Never substitute parts.
• Slide the front and back legs on the swing frame out until
they “click” into place.
• Repeat this procedure to open the other swing frame.
Front Leg
Back Leg
1
• While pressing the buttons on each front leg, insert the
front legs into the base tube.
• Push the front legs down into the base tube until the
buttons “click” into place.
Base Tube
Press Buttons
on Front Legs
2
Adjustable Pillow
Adjustable Pillow