Filter
Top Products
M0411pr-0920
8
• Locate the wire connector inside the front end of the vehicle.
• While feeding the wire connector through the hole in the dash, fit the
tabs on the dash onto the front end of the vehicle.
Dash
ASSEMBLY
F
3
Pull
• Turn the vehicle over.
• Fit the straight end of the steering column down through the hole in
the dash.
Steering Column
4
BOTTOM VIEW
SIDE VIEW
2
DASH VIEW
• Insert two #8 x ¾ " screws straight into the dash, as shown. Tighten
the screws.
Hint: If the screw holes in the dash do not align with the vehicle, place
a finger in the steering wheel opening in the dash. Pull the dash toward
the back of the vehicle to reposition it.