Filter
Top Products
M0411pr-0920
11
Handle
Latch
• Using a slotted screwdriver, turn both lock fasteners ¼ turn to the
locked position .
• First, “snap” the front of the seat to the vehicle
A
.
• Next, “snap” the four tabs near the back of the seat into the matching
slots in the vehicle
B
.
LOCKED UNLOCKED
• Position both seat belts so that the fasteners face each other,
as shown.
• Insert the T-loop end of each seat belt through the slot in each side
of the seat.
• Pull up on the seat belts to secure them to the seat.
T-Loops
Seat Belt
Fasteners
12
15
• Make sure the front wheels are not turned.
• Locate the latch on the back end of the vehicle.
• Press the tab and slide the latch to open.
• Insert the handle, as shown, and release the tab.
Note: Be sure the end of the handle is clean and free from debris
before inserting.
IMPORTANT! If the latch closes, the handle is properly inserted.
If it does not, remove the handle and repeat this step.
ASSEMBLY
F
13
14
B
SIDE VIEW
A