Filter
Top Products
Assembly
• Fit the pocket on the back of the pad onto the seat back.
• Fit the waist belts through the smaller slots in the pad.
9
Waist Belts
Pad
Slot
Slot
23
• Lift the bottom of the pad.
• Insert the pad elastic loops through the holes in the
seat bottom.
• Insert the crotch belt through the slot in the pad.
• From under the seat, fit the elastic loops onto the tabs on
the seat bottom.
24
• Insert a #8 x 1
1
/
4" screw through each frame hub and into
the swing tubes.Tighten the screws with a Phillips screw-
driver. Do not over-tighten.
• Again, push down on the seat to be sure the seat is secured
to both frame hubs.
Frame
Hubs
22
Pad
Elastic
Loops
Holes
Crotch
Belt
• Position the seat assembly so that the front of the seat is
toward the curved front base.
• While pressing the buttons on the swing tubes, insert them
into the frame hubs. Push the swing tubes up until the
buttons “snap” into the hole in the frame hubs.
• Push down on the seat to be sure the seat is secured in
both frame hubs.
Swing
Tube
Front
of Seat
Curved
Front
Base
Push
Button
Frame Hub
21
Seat Bottom
#8 x 1
1
/4
”Screw - 2
Shown Actual Size
B0323 Quick Response Swing 9/24/02 1:03 PM Page 9