Filter
Top Products
9
Assembly Battery Installation and Tips
Installation
•Locate the battery compartment door on the swing frame.
• Insert a coin into the battery compartment door and pry the
battery compartment door off of the swing frame.
• Insert four “D” (LR20) alkaline batteries as indicated inside
the battery compartment.
•Replace the battery compartment door.
Battery
Compartment
Door
Hint: We recommend using alkaline batteries for longer
battery life.
Battery Tips
•When swinging, sounds or lights slows/dims/stops, it’s time
to change the batteries!
•Do not mix old and new batteries.
•Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (nickel-cadmium).
•Remove the batteries during long periods of non-use.
Always remove exhausted batteries from the toy. Battery
leakage and corrosion can damage this toy. Dispose of
batteries safely.
•Do not dispose of batteries in a fire.The batteries may
explode or leak.
•Never short circuit the battery terminals.
•Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recom-
mended in the "Battery Installation" instructions are
to be used.
•If removable rechargeable batteries are used, they are only
to be charged under adult supervision.
•Rechargeable batteries are to be removed from the toy
before they are charged.
•If you use a battery charger, it should be examined regularly
for damage to the cord, plug, enclosure and other parts.
Do not use a damaged battery charger until it has been
properly repaired.
1.5V x 4
“D”(LR20)
SHOWN ACTUAL SIZE
•Fit the toy bar plugs into the sockets on the swing tubes.
Hint: If the toybar plugs do not fit into the sockets,turn the
toybar around.Now, fit the plugs into the sockets.
• Insert two 3.5mm x 1.25cm screws through each plug
and into each socket.Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
22
Plug
Toybar
Plug
Socket
Plug
Hub
3.5mm x 1.25cm Screw - 4
Shown Actual Size