Filter
Top Products
Care
Storage
•Turn the toybar back to it's storage position.
•Press the button on the inside of each housing and push the
rear legs toward the front legs. Stand the frame against a
wall for storage.
To remove the pad:
•Unhook the four elastic hooks from the pegs on the seat
back and bottom.
•Push the restraint belts back through the slots in the pad.
•Slide the upper pad pocket off of the seat back.
•Slide the lower pad pocket off of the seat bottom.
To replace the pad:
•Refer to Assembly steps 19 - 21.
Note: This product has no consumer serviceable parts. Do not
take this product apart.
The pad is machine washable.Wash the pad separately in
cold water on the gentle cycle.Do not use bleach.Tumble
dry separately on low heat and remove promptly.The frame,
tray,and toybar may be wiped clean using a mild cleaning
solution and a damp cloth.
15
Restraint
Belts
Upper
Pad
Pocket
Lower
Pad
Pocket
Elastic
Loops
Elastic
Loops
Press
Buttons
Toybar