Filter
Top Products
• At an angle, insert the tabs on the seat into any of
the top three sets of slots for the lower, middle or
upper position.
• Lower the seat so that the seat retainer inserts and
snaps into the slots in the frame.
• Pull up on the seat to be sure it is secure.
Label Decoration Attaching the Seat
6
Proper label application will help to keep the labels
looking their best!
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied
are clean and dry. Wipe your vehicle with a clean, soft,
dry cloth to remove any dust or oils.
• For best results, avoid applying a label more
than once.
• Apply the labels as shown in the illustration above.
• After applying a label, rub the label firmly with a cloth
to make sure the label is adhered to your vehicle.
Hint: The seat can be attached to the frame in
any of three positions, depending on the size of
your child. Check your child’s fit on the trike by
observing the seat to pedal distance, as it is
being ridden. If the pedals seem too far away
or too close for your child, move the seat up
or down.
Lower Position
Middle Position
Upper Position
Seat
Retainer
Slots
Seat
Tabs
13
(Place label 14
on opposite side
of seat)
(Place label 5 on
opposite side)
(Place remaining
label 15’s on
opposite side of
front wheel)
6
(Place label 1 on
opposite side)
2
11
(Place label 3 on
opposite side)
4
(Place label 7 on
opposite side)
8
15
10
9
12
Side View
Dash View