Filter
Top Products
• Fit a cap nut into the cap nut assembly tool. Place one
end of the straight axle into the cap nut.
• Tap the end of the straight axle with a hammer.
Make sure the cap nut is securely attached to the
straight axle.
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Assembly
3
1
Straight Axle
Hubcap
(Peg Side
Up)
Rear Wheel
(Indented Side
Down)
• Turn the frame upside-down.
• Insert the straight axle through the holes in the rear of
the frame.
Straight Axle
Hole
Hole
Frame
Bottom View
Cap Nut
Assembly
Tool
Scrap Block
of Wood
Cap Nut
Straight
Axle
2
Hubcap
(Peg Side
Down)
Cap Nut
Cap Nut
Assembly Tool
Rear Wheel
(Indented Side Up)
• Turn the frame on its side with the exposed end of the
straight axle up.
• Place the cap nut assembly tool under the assembled
rear wheel and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of
the straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle. Tap the
cap nut with a hammer. Gently pull the rear wheel up
to be sure the cap nut is securely attached to the
straight axle.
• Insert one of the tabs on a cover into a slot in the hub-
cap. Push to snap the cover into place. Repeat this
procedure to attach the other cover to the other hubcap.
Straight Axle
Cover
Hubcap
Bottom View
Scrap
Block of
Wood
4
3
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.
Pedal Axle
Tab
Pedal
Hub Slot