Filter
Top Products
11
To tighten the restraint:
• Feed the anchored end of the belt up through the buckle to form a loop Ạ.
• Pull the free end of the belt ạ.
• Repeat this procedure to tighten the other belt.
To loosen the restraint:
• Feed the free end of the belt up through the buckle to form a loop Ạ.
Enlarge the loop by pulling on the end of the loop toward the buckle.
• Pull the anchored end of the belt to shorten the free end of the belt ạ.
• Repeat this procedure to loosen the other belt.
Please Note: After adjusting the belts to fit your child,make sure you pull on the
restraint to be sure they are securely fastened.
Set-Up & Use
Anchored End
Free End
Buckle
Anchored End
Buckle
Free End
ạ
ạ
Ạ
Ạ
Loosen
Tighten
2