Filter
Top Products
8
•Position the product upright on a flat surface.
•Grasp both sides of a base wire.Pull both sides of the base
wire outward and then let the base wire rotate down.
Note: If the base wire does not freely rotate down, pull the
sides of the base wire further outward.
Set-Up & Use
To Unfold
Sides of Base Wire
1
Sides of Base Wire
2
Frame
Groove
Groove
3
Base Wire
Groove
Frame
PUSH
PUSH
•Push down on the product to
be sure each side of the base
wire is in the correct position.
The base wire should rest in
the groove in each frame.
•Repeat Set-Up & Use steps
1- 3 to unfold the other
base wire.
• Lift the product slightly so that each side of the base wire
“snaps” into the groove in each frame. Make sure you
hear a “snap”.
CORRECT