Filter
Top Products
6
Assembly
7
Hint: The lock nuts have been factory assembled to the frame.
During shipment,the lock nuts may have fallen out of the
frame.If this has happened,please fit the lock nuts back into
the lower hexagonal holes in the frame,so that the rounded
side of the lock nuts face out.You may find it easier to access
the hexagonal holes on the back of the frame if you push the
base up,so that the fabric is out of the way.
Shown Actual Size
M5 x 1
1
/
2
" Screw - 4
Base Wire
Frame
Lower Hole
Spring
Frame with
Lock Nuts
6
•Position the base wires around the base so that the ends
point upward and are against the lower holes in a frame.
•Place the springs onto the M5 x 1
1
/
2
" screws.
• Insert the M5 x 1
1
/
2
" screws with spring through the base
wires and into the lower holes in the frame with lock nuts.
Spring - 4
M5 Lock Nut (Inside Frame) - 4
Rounded
Side
•Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
•Repeat this procedure to attach the other ends of the
base wires to the frame with lock nuts on the other side
of the base.
Base
Wire
Spring
Frame
Lower
Hole