Filter
Top Products
Cradle and Swing Use
9
Restraint Belts
• Place your child in the seat.
• Pull the crotch belt up between your child’s legs and
fasten both waist belts to the crotch belt.Make sure you
hear a “click” on both sides.
To tighten the waist belts:
• Feed the anchored end of the waist belt up through the
buckle to form a loop .
• Pull the free end of the waist belt .
• Repeat this procedure to tighten the other waist belt.
To loosen the waist belts:
• Feed the free end of the waist belt up through the buckle
to form a loop .
• Enlarge the loop by pulling on the end of the loop
toward the buckle.
• Pull the anchored end of the waist belt to shorten the
free end of the waist belt .
• Repeat this procedure to loosen the other waist belt.
B
A
B
A
2
4
5
Waist Belt
Waist Belt
Crotch Belt
Power Settings
Power Dial
To start:
• Turn the power dial to the medium setting.The power
indicator lights.
• Give the seat a light push to start the swinging motion.
Adjust the power dial to the desired swing motion setting:
low, medium or high.
• Fit the tabs on the tray into the slots in the sides of the seat.
• To remove the tray,pull the tab out on one side of tray
and lift.
Tab
Slot
Using the Tray
Anchored End
Free End
B
A
To Tighten
Buckle
Anchored End
Free End
A
B
To Loosen
3
Hints:
- As with most battery-powered swings,a heavier child will
reduce the amount of swinging motion on all settings.In
most cases, the low setting works best for a smaller child
while the high setting works best for a larger child.
- If the low setting provides too much swinging motion for
your child, try placing one end of a blanket underneath
your child and let the other end of the blanket drape down
while swinging.