Filter
Top Products
Assembly
13
14
6
Motorized
Frame Tube
Hole
• Press the button on the
seat tube and slide the
seat tube into the motor-
ized frame tube.Make sure
the button on the seat tube “snaps” into the larger hole in
the motorized frame tube.
• Insert a M4 x 31.5 mm bolt through smaller hole in the
motorized frame tube and into the seat tube.
• Attach an M4 lock nut to the bolt. Make sure the rounded
side of the lock nut faces out.
• Using an adjustable wrench, hold the lock nut in place.
Then, using a Phillips Screwdriver, tighten the bolt. Do not
over-tighten.
• Slide the button on the top of the mobile into the slot in
the motorized frame.
Assembly is now complete.
Seat Tube
Button
Button
Slot
Mobile
• Turn the seat upright.
• Insert the tray tabs into the slots in each side of the seat.
• Insert the ends of the toy bar into the holes in the tray. Press
down on the ends of the toy bar to be sure they are secure.
Toy Bar
Tray
Slot
M4 x 31.5 mm Bolt
Shown Actual Size
M4 Lock Nut
15
Rounded
Side