Filter
Top Products
Using the Canopy
7
Base Wire
Frame
Groove
Groove
3
• Lift the product up slightly so that the base wire
“snaps” into the groove in each frame. Make sure
you hear a “snap”.
• Repeat Use Steps 2 and 3 to unfold the other base wire.
• Push down on the product to
be sure the base wires are in
the correct position.The base
wires should rest in the groove
in each frame.
Use
Base Wire
Groove
Frame
Correct
®
• Adjust the canopy and mesh cover up.
• While holding the mesh cover up, fasten the
zipper closed.
Canopy Up
Mesh
Cover Up
Zipper
®
• Adjust the canopy up or down.
Canopy Down
Canopy Up
Using the Mesh Cover
6
5
4