Filter
Top Products
4
Assembly
• Insert an M6 x 1
3
/
8
" screw through each frame tube
and into the frame.
• Fit an M6 lock nut into each corresponding hexagonal
opening on the back of the frame.
Metal
Canopy
Stay
• Insert the metal canopy stay through the canopy tunnel.
• Position the base upright on a flat surface.
• Locate the end of the base with the mesh cover. Insert
the entire plastic mesh cover stay into one of the
button holes in the mesh cover.
• Be sure to tuck the plastic mesh cover stay away from
the button holes in both sides of the mesh cover.
Frame Tube
Frame Tube
• Position the ends of the frame tubes against the
middle holes in a frame.
2
3
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or
sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price
®
for replacement parts and
instructions if needed. Never substitute parts.
M6 Lock Nut
Hexagonal
Opening
Base
Canopy Tunnel
Middle Hole
Middle Hole
Frame
Frame
Frame Tube
Frame
Tube
M6 x 1
3
/
8
" Screw - 4
M6 Lock Nut - 4
4
Base
Mesh Cover
Button Hole
1
Plastic Mesh
Cover Stay