Filter
Top Products
7
• Locate the battery compartment on the bottom of the
vibrations unit.
• Loosen the screw in the battery compartment door with a
Phillips screwdriver.
• Lift to remove the battery compartment door.
• Insert one “D”(LR20) alkaline battery as indicated inside
the battery compartment.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
Battery Installation
Battery
Compartment
Hint: We recommend using an alkaline battery for
longer battery life.
Battery Tips
1.5V
“D”(LR20)
SHOWN ACTUAL SIZE
+
–
• Remove the battery during long periods of non-use.
Always remove an exhausted battery from the product.
Battery leakage and corrosion can damage this product.
Dispose of the battery safely.
• Do not dispose of the battery in a fire.The battery may
explode or leak.
• Do not dispose of the musical toy in a fire.The battery(ies)
inside the toy may explode or leak.
• Never short circuit the battery terminals.
• A non-rechargeable battery should not to be recharged.
• Only a battery of the same or equivalent type as
recommended in the “Battery Installation”instructions
is to be used.
• If a removable rechargeable battery is used,it is only to be
charged under adult supervision.
• A rechargeable battery is to be removed from the product
before it is charged.
• If you use a battery charger,it should be examined
regularly for damage to the cord, plug, enclosure and
other parts. Do not use a damaged battery charger until
it has been properly repaired.