6
Assembly
• Turn the hardboard over
and insert it into the
slot in the front edge of
the pad.
• Fasten the pad buckles on
the front edge of the pad and underneath the seat.Make
sure you hear a “snap” on both sides.
• Press the fasteners together in the seat back portion of
the pad.
Assembly is now complete.
9
Pad
Buckles
• Turn the assembly upright.
• Fit the upper pocket on
the pad onto the seat
back tube.
• Fasten the pad buckles
around each side rail.
8
Pad
Pad Slot
Press
Seat Back
Hardboard
Seat Back
Tube
Pad
Buckles
Side
Rail