Filter
Top Products
Building the
Aquatic Rescue Command Center
™
• Place the bow deck on top of deck
supports C, D, E and F so that the
tabs on the top of supports fit into
the six slots on the bow deck.
• Push down on the bow deck near
each slot to “snap” the tabs in place.
Hint: It may be easier to “snap”
each tab in place if you hold the deck
support with one hand while pushing
down near the bow deck slot with the
other hand.
• Pull up on the bow deck to be sure
it is secure.
• “Snap” the propeller onto the peg
at the rear of the base.
• Position the elevator column
with the ribbed side facing you.
• Position the elevator platform
with the detailed side facing up.
• Tip the elevator platform to fit
the tab through the slot in the
elevator column.
• Turn the elevator platform so
that the detail side faces up.
The elevator platform should
now stay in place within the
elevator column.
7
8
Bow Deck
Propeller
E
D
F
C
8
Elevator
Column
Elevator
Platform