Filter
Top Products
Building the
Aquatic Rescue Command Center
™
• Locate deck supports A and B.
Note the markings on the supports.
• Insert the pegs on each end of the
map into the holes on the inside of
deck support A and deck support B.
Hint: You will need to hold these parts
together, then proceed to the next step.
• With the base on a flat surface,
note the A and B markings in the
square slots.
• Insert and “snap” deck support
A and deck support B into the
matching base slots marked A
and B.
• Pull up on each support to be
sure each is secure in the base.
1
2
5
Map
A
B
B
A
Map
Base