Filter
Top Products
11
Hint
If your child is having
trouble programming voice
commands, try program-
ming more than one word
or a word with multiple
syllables. For example,
instead of programming
the command “sit”, try
programming“sit down”.
Important!
If programming fails after
several tries, your child
may be too young to
speak clear enough (or
clear enough repetively)
to program the P.P.T.
We recommend that
your child use the dog in
Trainer in Training mode.
Congratulations!
Voice command program-
ming is now complete!
Now, fill in the chart on
page 13.
EXPERT TRAINER (6+ YEARS)
• Open the Large Cover on the P.P.T.
• Press a Command Button on the P.P.T.
• Listen for the voice prompt through the remote
headset. “Please say sit.”
• Now, it’s your child’s turn to say the command.
Your child says: “Sit.”
• If your child speaks too loud, too soft, too soon, or
unclear, the voice prompt may say: “Too loud. Please try
again.”; or “Too soft. Please try again.”; or “Too soon.
Please try again.”; or “What did you say?”
Again, your child says: “Sit.”
• If the P.P.T. does not recognize the voice command
after three tries, the voice prompt says: “Training
failed.” If this happens, please press a Command
Button again and start the voice command programming
process again.
• When programming a voice command is successful, the
voice prompt will ask your child to repeat the command
a second time. “Please repeat sit.”
• Your child now needs to repeat the command again
in a clear, normal voice.
Your child says: “Sit.”
• If the repeated voice command is not recognized, the
voice prompt will repeat the request.
• When programming a voice command is complete, the
voice prompt will tell you that programming is complete,
and you will hear the command in your child’s voice.
“Training Sit complete.”
• Repeat this sequence
to program all nine
commands. Then, slide
the Program Switch to
Play
★
, and close the
Program Switch Door.