Filter
Top Products
IMPORTANT! Test sound reception of this monitor before first time
use and whenever you change location of transmitter (see page 5).
Set transmitter channel switch to same channel as receiver.
Place transmitter in same room with child.Point microphone
directly toward crib or play area.
Unwrap and fully extend power cord for best transmission.
Plug transmitter power cord into wall outlet.
Slide transmitter power switch to turn power on.
Power indicator lights.
Place receiver where you will see or hear it.
If you will be using receiver near a wall outlet,we recommend
that you use the AC adaptor.Unwrap and fully extend AC
adaptor cord for best reception.Plug AC adaptor cord into
wall outlet.
Rotate receiver power/volume dial to turn power on.Power
indicator lights.Rotate power/volume dial to adjust volume.
1
2
3
4
5
6
7
8
If you have any questions about this product:
In Canada,call 1-800-567-7724,or write to:Mattel Canada Inc.,6155 Freemont Blvd.,
Mississauga,Ontario L5R 3W2.
In Great Britain, telephone 01628 500303.
In Australia, Mattel Australia Pty.Ltd.,658 Church Street,Locked Bag #870,
Richmond,Victoria 3121 Australia.Consumer Advisory Service 1-800-800-812
(valid only in Australia).
Note: AC adaptor is 120 VAC, 60Hz, 3W input; 6 VDC 100mA output;
center positive polarity; plug OD is 5.5 mm, plug ID is 1.5 mm.