Filter
Top Products
Receiver Battery Installation
3
Battery
Compartment Door
• Locate battery compartment door on back of receiver.
• Loosen screw in battery compartment door with a Phillips screw-
driver. Remove battery compartment door.
• Plug battery connector into receiver connector.
• Replace battery compartment door.Tighten screw with a
Phillips screwdriver.
Battery Tips
• Remove the battery during long periods of non-use.Always
remove an exhausted battery from the product. Battery leakage
and corrosion can damage this product.Dispose of battery safely.
• Do not dispose of battery in a fire.The battery may explode or leak.
• Never short circuit the battery terminals.
• A non-rechargeable battery is not to be recharged.
• Only a battery of the same or equivalent type as recommended in
the “Battery Installation”instructions is to be used.
• If a removable rechargeable battery is used,it is only to be charged
under adult supervision.
• If you use a battery charger,it should be examined regularly for
damage to the cord,plug,enclosure and other parts.Do not use
a damaged battery charger until it has been properly repaired.
• Use only the provided AC adaptor to charge the battery.
Your Fisher-Price® Vibrating Monitor includes a rechargeable battery.
Before first-time use,you will need to charge the battery (see next page).
Hint: If battery connector will not plug into receiver connector,turn it over
and try again.Do not force the battery connector into the receiver connector.
Battery Connector
Receiver Connector