Filter
Top Products
Testing Reception (for Sound)
5
Test transmitter transmission and receiver reception
each time you change location of use.
Place transmitter in room in which
you intend to use it.Rotate transmitter
power switch to turn power on.Power
indicator lights.Turn on a radio.
Place receiver in room in which
you intend to use it.Rotate the
power/volume dial to turn power
on.Power indicator lights.Adjust
receiver location.
• Variable light display lights when
sound is received by receiver:
- One two dots light for
shallow sounds.
- Three or more dots light for
louder sounds.
If you experience interference
(buzzing or static,etc.) while using
one channel setting,switch both
units to other channel.Selecting
a channel is usually a one time
adjustment.
Hint: All five dots in receiver variable light display light:
- If you turn receiver power on before transmitter power.You will also hear
static noise.Turn volume down on receiver and turn transmitter power on.
- If the receiver is too far away from the transmitter.Move the receiver closer
to the transmitter.
- If loud sounds are transmitting.
Adjust
Channel
BUZZZZ
STATIC
Power
Indicator
Power
Switch
Power
Indicator
Power/Volume
Dial