Filter
Top Products
4
Assembly Instructions
Place stroller frame on end as shown. Grasp handle, pull back and up
sharply until frame opens and locks
with a click.
View of unfolded stroller.
1
To Unfold:
3
To Install Front Wheels:
2
To Install Rear Wheels:
Push axle assembly onto frame until but-
tons snap into holes on assembly. Make
sure both sides are on completely.
Remove protective packing from axle
ends and discard. Remove Cotter pins
and washers from axle and set aside.
S
lide 1 washer onto axle so washer
is against the brake. Put one of the
single wheels onto axle with hub to
the inside. Slide on another washer.
Insert straight side of Cotter pin
through hole in the axle. Align pegs
in wheel cover with holes in wheel
and snap on. Repeat for other side.
1 washer
1 washer
single
wheel
hub
cap
cotter
pin
brake
axle
assembly
View of assembled front wheels.
frame tube
wheel
assembly
socket
Align front wheel assembly socket with
front frame tube as shown.
Push the wheel assembly onto frame
tube until it clicks into position. Repeat
for other front wheel.