Dell S199WFP Baby Monitor User Manual


  Open as PDF
of 23
 
Power Management Modes
IfyouhaveVESA'sDPM™compliancedisplaycardorsoftwareinstalledinyourPC,themonitorautomaticallyreducesitspowerconsumptionwhennotinuse.Thisis
referred to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The
following table shows the power consumption and signaling of this automatic power saving feature:
Activate the computer and the monitor to gain access to the OSD.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
15-pin D-Sub connector
VESA Modes
Horizontal Sync
Vertical Sync
Video
Power Indicator
Power Consumption
Normal operation (with Dell Soundbar active)
Active
Active
Active
Blue
75 W (maximum)
Normal operation
Active
Active
Active
Blue
32 W (typical)
Active-off mode
Inactive
Inactive
Blanked
Amber
Less than 2 W
Switch off
-
-
-
Off
Less than 1 W
NOTE:
The OSD only functions in the normal operation mode. One of the following messages appears when the Menu or Plus buttons are pressed when in
Active-off mode.
1 : Auto Detect (Analog Input)
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
or
1 : Auto Detect (Digital Input)
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
2: Analog Input
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
or
3: Digital Input
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
This monitor is ENERGY STAR®-compliant as well as TCO '99 power management compatible.
Pin Number
Monitor Side of the 15-pin Side Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-test
6
GND-R
7
GND-G
8
GND-B
9
DDC +5V
 previous next